how to tile a shower

How to Tile a Shower – Kitchen and Bathroom Remodeling

Beautifying the bathroom may involve putting in place a few, or a lot of tile structures. Shower tiles are very important in bathroom remodel. Bathroom tiling will add great value to your bathroom. Some people may opt to tile only the floors while others may want to include the walls and make provision for an alcove, a bench, and a shelf, giving it a more even finish. 


Whichever option you choose, the tiles will have to be installed and you can either do this by yourself or use the help of a remodeling company or a tile setter. This piece will act as a guide if your preference is to install the tile and build the additionals yourself. You might want to ask how to tile a shower wall, how to tile a shower floor, or how to grout shower tile. We hope this article will help you to figure out tiling a shower.

Shower Tiling 101

In the past, showers were considered to be of no great significance, and as such was made to be very simple. This meant there were no allowances for the inclusion of benches, shelves, and alcoves. However, with time and the development of the materials used in building showers to be waterproof, these features have been widely welcomed and incorporated into bathrooms.


Before deciding to get your hands dirty by tiling your shower yourself, you need to have previous tiling experience as it is not enough to read the brief and get to work. Professional tile setters, such as the ones you’ll find at the Uniqhouse, have years of experience and that’s why they’re guaranteed to give you value for your money.


In addition, shower tiling is very demanding work and can take a professional about two to four days to complete for a regular kitchen.

Materials and Tools required for Shower Tiling

The proper tools needed for this project must be gathered before you commence. These tools are;

  • Bucket
  • Safety glasses
  • Rubber gloves
  • Taping knife
  • screwdriver
  • Hammer
  • Framing square
  • Caulk gun
  • Cordless drill
  • Circular saw
  • Level
  • Miter saw
  • Notched trowel
  • Paintbrush
  • Large sponges
  • Rags
  • Stapler
  • Trowel
  • Utility knife
  • Grout float
  • Tile cutter
  • Tile saw
  • Waterproof membrane
  • Tiles

The Right Techniques and Steps Involved in Shower Tiling

The steps involved in shower tiling might be a bit complicated since you’ll be adding a bench, alcove, and shelf:


  • Ready the tools and materials that you’ll be using for the project.
  • Make plans by drawing templates of your desired shower look. It would help if you used the tile you intend to use for the shower to do this.
  • Frame. In this step, you’ll have to frame the wall from floor to ceiling. Then repeat this for the corners where the additionals would be installed.
  • The next step is to make the water-prone areas waterproof by introducing the waterproof membrane. Two coats of waterproof membrane are required.
  • Tile the alcove. Start with the sill, then move to the sides and top.
  • It’s time to tile the bench. Tile the entire seat until the edges are correctly aligned.
  • Then, you tile the shelf. First, you have to frame it, and then you screw backboards into it before tiling.

Engaging Remodeling Company for Your Project

At this point, you’ll agree that getting your shower tiled perfectly well is not an easy job. From scouting for the appropriate materials to getting the work done, you’ll need to spend some energy. Everything requires time and commitment that you may not be willing to spare. 


This shouldn’t bother you because people with the skill and dedication to enduring your shower match your wishes. At the Uniqhouse, we will schedule a free consultation as soon as you contact us. Once all is set, we can proceed to create your beautifully tiled shower! Reach us now for a free consultation and bathroom remodeling ideas or bathroom tile ideas.


If you like this article, you can also check our other blog posts.

Get Started on Your Dream Home!